Buy Web API with Attendance and Access Control Systems

Highly elegant design, with touchpad and very lightweight device. It supports fingerprint, card, and password. It has 2' inch TFT with clear workflow menu options. It is a suitable access control device for good looking office. It can be upgraded with IP67 waterproof optionally.

If the machine is used as attendance machine, by default, the first recorded attendance of the day will be considered as IN, and the next one will be OUT, and the next one will be IN, and so on.

The device/clock supports a fingerprint/card exit reader and push-button for the exit. it can be attached WiFI additionally. It is a high-end model and comes with the lowest price in the global industry with such features.

Note:It supports numerical user id while adding the user in the device. no break in/out support. The supported exit reader is RC12 Exit Reader.

One of the following automatic punch state can be set

• 1. Treat all the Punches as IN
• 2. Treat all the Punches as OUT
• 3. Treat first entry as IN, next as OUT, and next as IN and next as OUT and etc.
• 4 Treat first entry as IN, and rest of the entries as OUT

Do you like to link this device with your own web application? Click Here for WEB API Documentation
This device comes with either LAN or LAN+WIFI+Waterproof.

It recognizes the face from the distance up to 2-3m long and has extra wide angle recognition, which significantly improves the maximum traffic rate. It is an artificial intelligence face artificial intelligence system.

By default, the first recorded attendance of the day will be considered as IN, and the next one will be OUT, and the next one will be IN, and so on.

Detects faces in less than 0.02 seconds

4.3 inch touch screen display

720 x 1280 high resolution.

Supports WDR (Wide Dynamic Range) with good performance under strong light, dark light, and backlight environments.

Attachable with Turnstile and Boom Barrier.

Dual 4MB camera anti-counterfeiting prevents face recognition using photo or video

5000-50000 Face and Card supported attendance and access control system. No user interaction is required for recording IN or Out, which has to be handled in the software logic.

Egnlish, Spanis, Arabic, Tai, Farsi, Portuguese, French, Italian, Japanese, Koren and more languages are supported

13.56Mhz RFID Card reader can be added optionally. This device supports only numerical for recording the user id.

It is dual core processor with 4GB RAM and 16 GB flash memory.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

Detects up to 5 Faces at a time, records the attendance, and allows the employee access. Supports face mask detection. It recognizes the face from a distance up to 2-3m long and extra wide angle recognition, which significantly improves the maximum traffic rate. It is an artificial intelligence face artificial intelligence system.

By default, the first recorded attendance of the day will be considered as IN, and the next one will be OUT, and the next one will be IN, and so on.



Detects faces in less than 0.02 seconds

4.3-inch touch screen display

720 x 1280 high resolution.

Supports WDR (Widy Dynamic Range) with good performance under strong light, dark light, and back light environments.

Attachable with Turnstile and Boom Barrier.

Dual camera anti-counterfeiting prevents face recognition using photo or video

5000-50000 Face and Card supported attendance and access control system. No user interaction is required for recording IN or Out, which has to be handled in the software logic.

Egnlish, Spanis, Arabic, Tai, Farsi, Portuguese, French, Italian, Japanese, Koren and more languages are supported

WIFI is inbuilt. The 13.56Mhz RFID Card reader can be added optionally. This device supports only numerical for recording the user id.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

A very good model for a Face-supported biometric attendance system. It supports 1000 Faces, 3000-5000 Fingerprints, and RFID -cards for recording attendance. It is an access control system with a Card/Password-based exit reader.

Optionally Battery, WiFI, 2G/3G/4G can be added

Do you like to link this device with your own web application? Click Here for WEB API Documentation

Limitation:

It supports only numerical user id. It supports Check In, Check Out, Break Out, and Break In

Detects up to 5 Faces at a time, records the attendance, and allows the employee access. Supports face mask detection. It recognizes the face from the distance up to 2-3m long and has extra wide angle recognition, which significantly improves the maximum traffic rate. It is an artificial intelligence face artificial intelligence system.

Detects faces in less than 0.02 seconds

4.3 inch touch screen display

720 x 1280 high resolution.

Supports WDR (Wide Dynamic Range) with good performance under strong light, dark light, and backlight environments.

Attachable with Turnstile and Boom Barrier.

Dual camera anti-counterfeiting prevents face recognition using photo or video

5000-50000 Face and Card supported attendance and access control system. No user interaction is required for recording IN or Out, which has to be handled in the software logic.

Egnlish, Spanis, Arabic, Tai, Farsi, Portuguese, French, Italian, Japanese, Koren and more languages are supported

13.56Mhz RFID Card reader can be added optionally. This device supports only numerical for recording the user id.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

The only GPS inbuilt attendance system in the market till now. It detects up to 5 faces at a time, and records the attendance along with longitude and latitude, and sends the details to the server on real time. It recognizes the face from the distance up to 2-3m long and extra wide angle recognition, which significantly improves the maximum traffic rate. It is an artificial intelligence face artificial intelligence system.

By default, the first recorded attendance of the day will be considered as IN, and the next one will be OUT, and the next one will be IN, and so on.

Detects faces in less than 0.02 seconds

4.3 inch touch screen display

720 x 1280 high resolution.

Supports WDR (Widy Dynamic Range) with good performance under strong light, dark light and back light environment.

Attachable with Turnstile and Boom Barrier.

Dual camera anti-counterfeiting prevents face recognition using photo or video

5000-50000 Face and Card supported attendance and access control system. No user interaction is required for recording IN or Out, which has to be handled in the software logic.

Egnlish, Spanis, Arabic, Tai, Farsi, Portuguese, French, Italian, Japanese, Koren and more languages are supported

WIFI is inbuilt. The 13.56Mhz RFID Card reader can be added optionally. This device supports only numerical for recording the user id.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

It is a fingerprint, card, password support attendance system. It has 2.8' inch TFT with the clear workflow menu system

t can be attached WiFI, 2G, 3G, 4G additionally. It is a high-end model and comes with the lowest price in the global industry with such features. It supports only numerical user id. It records Check-In and Check-Out (no break-in/out support)

Do you like to link this device with your own web application? Click Here for WEB API Documentation

It is a best standalone biometric device in the world. No software support required. The reports can be viewed and downloaded through USB pen drive.

It supports 1000 fingerprint, and optional 1000 id cards (125khz). It maintains up to 200,000 attendance logs. It does not support any software, API, cloud or any communication with comptuer.

Products Features:
Attendance Shift Setting:

• As days, weeks, months to set the attendance
• Support work in&out, relay, overtime setting
• Support holiday, weekend and leaving setting
• Support retroactive setting
High resolution ratio LCD shows employee name, fingerprint image. T9 input too register the employee name in the attendance device. Languages supported:English/Spanish/Turkish/Arabic/Thai/French and more

USB Pen driver store data
• USB pen driver download the reports in Excel or TXT file
• USB Pen driver download or upload employee details for easy editing
• USB Pen driver download or upload attendance shift setting

Attendance Exports
• Auto generate reports in Excel or TXT file
• Both raw data and statistic data reports

Detects single face and up to 5 Faces at a time, and records the attendance, and allows the employee access. Supports face mask detection. It recognizes the face from the distance up to 1-2.5m long and extra wide angle recognition, which significantly improves the maximum traffic rate. It is an artificial intelligence face artificial intelligence system.

By default, the first recorded attendance of the day will be considered as IN, and the next one will be OUT, and the next one will be IN, and so on.

Detects faces in less than 0.02 seconds

10.1 inch touch screen display

800 x 1280 HD resolution.

99.9% Face Recognition Accuracy

Supports WDR (Widy Dynamic Range) with good performance under strong light, dark light and back light environment.

Attachable with Turnstile and Boom Barrier.

Optionally: Birthday can be configured, which will say happy birthday when user is detected

Optionally: QR code shall be detected

Dual camera anti-counterfeiting prevents face recognition using photo or video

50000 Face, fingerprint and Card supported attendance and access control system. No user interaction is required for recording IN or Out, which has to be handled in the software logic.

Egnlish, Spanis, Arabic, Tai, Farsi, Portuguese, French, Italian, Japanese, Koren and more languages are supported

By default, the first recorded attendance of the day will be considered as IN, and the next one will be OUT, and the next one will be IN, and so on.

WIFI and 13.56Mhz RFID Card reader can be added optionally. This device supports only numerical for recording the user id.

Does not support choosing check in/out, break in/out as the detection will be faster than the user touches the screen.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

Supports face mask detection. It recognizes the face from the distance up to 2-3m long and extra wide angle recognition, which significantly improves the maximum traffic rate. It is an artificial intelligence face system.

The terminal with temperature and mask detection will be a perfect choice to help reduce the spread of germs and help prevent infections straightly at each access point of any premises and public areas such as hospitals, factories, schools, commercial buildings, stations during the recent global public health issue with its fast and accurate body temperature measurement and masked individual identification functions during facial and palm verification.

Detects faces in less than 0.2 seconds

5inch touch screen display

720 x 1280 high resolution.

Supports WDR (Widy Dynamic Range) with good performance under strong light, dark light and back light environment.

Attachable with Turnstile and Boom Barrier.

Dual camera anti-counterfeiting prevents face recognition using photo or video

5000-50000 Face and Card supported attendance and access control system. No user interaction is required for recording IN or Out, which has to be handled in the software logic.

Egnlish, Spanis, Arabix, Tai, Farsi, Portuguese, French, Italian, Japanese, Koren and more languages are supported

Temperature detection features:
Temperature Measurement Distance: 30cm~50cm
Temperature Measurement Accuracy: ±0.5 ^oC
Temperature Measurement Range: 25 ^oC to 45 ^oC

WIFI and 13.56Mhz RFID Card reader can be added optionally. This device supports only numerical for recording the user id.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

This fingerprint starter gives the secured handling of any automobiles by allowing only authorized persons to start the vehicles such as forklifts, lorry, cars, buses, trucks and etc, It is also known as Forklift Biometric Controller System.

It can be used with any light/heavy-duty vehicle running with a 12-24v battery and can be extended as per the customer's need with a small additional cost. No more circuits or controllers you need additionally to fix this unit into your automobile.

Biometric device can be added waterproof with IP67 rated as optional. The controller is not waterproof. So, the controller and biometric device(non-waterproof) should be kept in a safe place . A basic report can be downloaded using a (USB) pen drive from the device.

FleetBio32: FleetBio31 and 32 are the same devices, but, FleetBio32 sends the data about who started and when started, to the server in real-time. FleetBio32 has two variations for communicating with servers. One comes with WIFI supported. One comes with GPRS/3G/4G support. The data that comes to the server can be captured by our server application. The API documentation is available at Click Here for WEB API Documentation. Regarding the cost, share your requirement at whatsapp: +91-98409-81006 and get the cost details based on your requirement.

Related Article: https://camsunit.com/application/cams-forklift-biometric-system.html

This fingerprint starter/igniter gives the secured handling of any automobiles by allowing only authorized persons to start the vehicles such as forklifts, lorry, buses, trucks and etc,. It is also known as Forklift Biometric Controller System.

It can be used with any light/heavy-duty vehicle running with a 12-24v battery and can be extended more as per the customer's need with a small additional cost. No more circuits or controllers you need additionally to fix this unit into your automobile.

Following video Is done with Model: FleetBio31: Waterproof+server communication model. The process is the same with this model except for the main biometric device.

Detects QR code and gives the QR code value through the controller unit (Cams RC33). It is a wiegand reader, you can connect with any in WG26 or WG34 supported devices. QR code value will be sent to your server on a real-time basis through your call-back server URL. Data will come to your server in this format https://camsunit.com/application/biometric-web-api-sample-request-response.html?operation=RealTimePunchLog

• Reading distance : up to 20cm
• Optional: Barcode, RFID Proximity card, MiFare card
• Card reading range (optional): 3-5cm
• Reading speed: <20ms
• Dimension (L, W, H): 86 x 86 x 8 mm
Optionally supported QR code formats: Code128, Code39, EAN-13, EAN-8, EAN-128, ISBN-13, Data Matrix, PDF417, UPC-A
• Communication: Wiegand. Optionally: RS232 and RS485
• Humidity: 10%-90%
• Application Environment: -20^oC to 70^oC
• Weight : 150g
• Working current: 800mA
• Case material: Tempered glass (code window)

CAMS-MFS100(a) is a high-quality USB fingerprint sensor for fingerprint authentication for web applications. It is accessible through web pages with plain javascript support, for web-based fingerprint login, web-based fingerprint attendance system and etc. Templates are 5 layer encryption protected which gives you the best-secured scanner. Click here for the SDK Documentation
It works in the local network, which means doesn't required any internet connection. API will not communicate with any other server apart from your own web page where the API call is triggered from. As part of this, the following APIs are provided

1. Capture: Captures the fingerprint and returns the fingerprint, template, image, and quality score of the fingerprint
2. Compare: Compares two fingerprint templates and returns the matching score.

It is an enriched version of Mantra-MFS100. Its optical sensing technology efficiently recognizes poor-quality fingerprints. It can be used for web-based authentication, identification, and verification functions that let your fingerprint act like digital passwords that cannot be lost, forgotten, or stolen. Hard optical sensor is resistant to scratches, impact, vibration, and electrostatic shock.

The Resolution is 500 DPI / 256 gray and the sensing area is 15 x 17 mm. Template supports ISO19794-2 and ANSI-378 optionally. STQC, CE, FCC, RoHS, IEC60950 Certified

It supports all Windows platforms (32bit/64bit). CAMS is actively working on R&D for making it to support Linux, Android, and iOS in the future.

Following is the demo video with one the scanners we support:

Web API service is provided for the various fingerprint scanners from ZKTeco, Mantra and etc. API works in local network, means doesn't required any internet connection. API will not communicate with any other server apart from your own web page where the API is triggered from.
As part of this, following APIs are provided

1. Capture: Captures the fingerprint and returns the fingerprint, template, image and quality score of the fingerprint
2. Merge: Merges the three fingerprint templates and returns the merged template. Applicable for ZkTeco scanners
3. Compare: Compares two fingerprint templates and returns the matching score.

Following are some of the supported scanners

1. ZK4500
2. ZK7500
3. ZK9500
4. MFS100
5. SLK20R

Please check our technical support team's whatsapp (+91) 984-098-1006 about the supportability of your scanner prior to the purchase.

The APIs are applicable as per the hardware capability. Once the service is purchased, SDK with working version sample HTML file to be provided which can be modified as per your business need. At present, the API is supported only for the Windows platform.

After 3 months from the purchase, for any technical support, 20 USD charge will be applicable.

Following is the demo video with one the scanners we support:


Prerequisite: Driver for the respective scanner should be installed and scanner must be working with the computer properly with the scanner's default desktop application

All the biometric devices starts with model RSP10 are called 1x version biometric devices. This lite version of 1x protocol engine helps to communicate the biometric device with your remote/local server without going through the cams data server or any external data server.

You need this only if you need the biometric device communication should be done only with your server directly not involving cams data server. You also need if you like to run your biometric system in local environment where you dont use the internet.

This engine does not impact the API activation cost and license cost. They remain same as usual.

The engine can not be transferred. Once installed, then it should remain running in the same server all the time.

Supports all the OS versions of Windows, Unix/Linux and Mac. The cost will vary based on the OS and its versions. The basic cost is captured here.

Implementation time is 15 days. The given product cost is applicable while the number of biometric devices goes beyond 50

All the biometric devices starts with model R20 are called 2x version biometric devices. This protocol engine lite version helps to communicate the biometric device with your remote/local server without going through the cams data server or any external data server.

You need this only if you need the biometric device communication should be done only with your server directly not involving cams data server. You also need if you like to run your biometric system in local environment where you dont use the internet.

This engine does not impact the API activation cost and license cost. They remain same as usual.

The engine can not be transferred. Once installed, then it should remain running in the same server all the time.

Supports all the OS versions of Windows, Unix/Linux and Mac. The cost will vary based on the OS and its versions. The basic cost is captured here.

Implementation time is 15 days. The given product cost is applicable while the number of biometric devices goes beyond 50

All the biometric devices starts with model i3, f3, r3 are called 3x version biometric devices. This protocol engine lite version helps to communicate the biometric device with your remote/local server without going through the cams data server or any external data server.

You need this only if you need the biometric device communication should be done only with your server directly not involving cams data server. You also need if you like to run your biometric system in local environment where you dont use the internet.

This engine does not impact the API activation cost and license cost. They remain same as usual.

The engine can not be transferred. Once installed, then it should remain running in the same server all the time.

Supports all the OS versions of Windows, Unix/Linux and Mac. The cost will vary based on the OS and its versions. The basic cost is captured here.

Implementation time is 15 days. The given product cost is applicable while the number of biometric devices goes beyond 50

Live Logger (http://logger.live) is a free cloud-based real time biometric attendance reporting system. Following are its associated free features:

1. User Management
2. Attendance Management
3. Manual Attendance by HR
4. Team/Department Management

Attendance Report includes Over Time, Late Comers, Time Spent, Break Hours and move automatic calculation. Reports can be viewed and downloaded in Excel and PDF file formats. The report is available by user-based, location-based, department based

Demo login credential is : login id : adminuser@grr.la password: 123123123, domain www.logger.live

There are no charges for the integration. But only the API yearly license is applied. API cost is listed here

All the biometric devices that are verified at https://developer.camsunit.com/ shall be supported by this engine. Basically, before start verifying, the biometric devices are expected to have Cloud Server communication or Server IP communication or ADMS or WDMS or Web Server communication support. This protocol engine lite version helps to communicate the biometric device with your remote/local server without going through the cams data server or any external data server.

You need this only if you need the biometric device communication should be done only with your server directly not involving cams data server. You also need if you like to run your biometric system in local environment where you dont use the internet.

This engine does not impact the API activation cost and license cost. They remain same as usual.

The engine can not be transferred. Once installed, then it should remain running in the same server all the time.

Supports all the OS versions of Windows, Unix/Linux and Mac. The cost will vary based on the OS and its versions. The basic cost is captured here.

Please note that, this cost is applicable while going bulk qunatity of at least 100 units integration. For lesser quanity the protocol engine cost will be higher

This service facilitates real-time integration of the biometric attendance system with Zoho People. There is no need for software or a desktop setup. To get started, you only need to generate an Auth token from your Zoho account and share it with us. We will provide you with the necessary instructions. To ensure seamless communication between your biometric device and Zoho account, the device must be connected online at all times.

Please note that this integration service does not include any hardware. You can choose to purchase any attendance system hardware listed on the Zoho Support Products page of our website. However, it is essential to purchasing the API along with the Zoho integration service. If you already have your own biometric devices that support ADMS, Cloud Server communication, or Internet communications, you must purchase the "Protocol Update" along with the other mentioned services to enable the web API for your devices.

To gain a better understanding of real-time communication, we recommend watching the following YouTube video:

This module helps to integrate the biometric attendance system with Odoo server on real-time basis. No software or desktop is required for the setup. Only device should be connected online all the time to ensure the realtime communication.

The module can be downloaded freely for now from Odoo Biometric App Watch youtube video https://www.youtube.com/watch?v=JHgdOWkrd-A for understanding the features supported in the module

You must buy attendance and management api for the Odoo Standard Edition module to work with the real time biometric communication. If you are not buying/using the CAMS device then you must buy "Protocol Update" to enable the web api to your devices.

It helps to integrate the biometric attendance system with ErpNext server on real-time basis. No software or desktop is required for the setup. Api Key and Secret key from your ERPNext server should be created shared to support@camsunit.com along with the transaction id of the purchase. And device should be connected online all the time to ensure the realtime communication. Note that, this feature is supported only from ERPNext 11.0.3. And it will give your report only under Employee CheckIn Report. Rest of attendance report configurations should be handled by the customer

You must buy attendance api for the ERPNext integration to work. If you are not buying CAMS device or using 3rd party biometric device then you must buy "Protocol Update" to enable the web api into your devices.

The controller supports RC15 Card Exit Reader, RC25 Card+Pin Exit Reader, and RC12 Fingerprint + Card + Pin Exit reader.

The controller supports RS485 and Wiegand 26/34 readers. It supports Web API, which can be connected to any remote server without any software installation. controller supports only the cards with numerical value up to 9 digits

Do you like to link this device with your own web application? Click Here for WEB API Documentation

Drawback:Supports only numerical user id while adding the user in the device

This module helps to integrate the biometric attendance system with SAP SuccessFactors in real time. No software or desktop is required for the setup. Only APIKey and your server URL are needed from your end to complete the integration. The biometric device should always be connected online to ensure real-time communication between the biometric device and your sap account. All the offline punched logs will be pushed to the sap server once the biometric device comes online. There will not be any data loss.

The clock-in, and clock-out data are pushed to the SAP SuccessFactors server based on the API given in their SAP's official document

You must buy API additionally for the SAP SuccessFactors biometric integration. You can use any of the biometric machines listed at SAP SuccessFactors supported biometric clock devices. If you have the biometric clocks already with you, such as ZkTeco, eSSL, etc., then you must buy "Protocol Update" to enable the web API to your devices.

UHF Weigand Reader helps to reader RFID tags from 10-12m distance. The working frequency range is 860 Mhz to 960 Mhz. Its body material is made up of Die-Cast Aluminium. IP66 waterproof protected. To integrate this reader with the web application running a remote server, it has to be integrated with (We support for the connectivity) Full Access Control systems. These systems provides the Web API communication to work with the web application. The Web API documentation for integrating the biometric systems located at Web API Documentation.

The supported full access controls systems are RSP10i3, RSP10i4, RSP10i5, RSP10f1, RSP10t1, and RSP10t9.

This charger works as a external battery or mini UPS. It has toggles set the device to work of 5v, 9v, and 12v. Under the environment where the power is cut off suddenly, power discharge can be realized automatically to continue power supply for the biometric device.

1. Input : 5V2A, 9V1A, 12V1A
2. Output : 5V2A, 9V1A, 12V1A
3. Backup Time: Up to 5 hours on idle time

. Watch the video for understanding its operation

It is an exit reader to be used with any 3x, 4x biometric attendance device which supports RS485 port. It supports fingerprint, card and password

Response time <= 0.01s to 0.8s
Verify mode: fingerprint, password, ID card
Working voltage/current: DC9V~12V/1A
Additional Function: BELL
Port: RS485

It is a card exit reader to be used with any of the master devices such as SlimBeast(i33), FaceBot (f31), etc,

It supports 125khz TK4100 chip based RFID card. It works either on wiegand-26 or wiegand-34 communication. The reading distance is supported up to 8cm.

Product dimension: 8.5cm x 8.5cm x 2cm

Fingerprint, Proximity Card Exit Slave Reader. Attachable with Full Access Control systems such as -rsp10i3, rsp10t9, rsp10f1, rsp10i5,rsp10t1 and rsp10i4

It is a card exit reader to be used with any of the master devices such as SlimBeast(i33), FaceBot (f31), etc,

It supports 125khz TK4100 chip based RFID card. It works either on wiegand-26 or wiegand-34 communication. The reading distance is supported up to 8cm.

Product dimension is: 11.5cm x 7cm x 1.5cm

RSP10i3 is designed with good looking body and high performance scanning. It supports 3000 fingerprints and 10000 cards and the full door access. This is perfect attendance system for corporate offices where access control is expected. It has battery inbuilt for indian customers. For out side indian customer, due to the customs restrication, bettery is not applicable.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

Web API Supported 2000 face capacity attendance system which has 2000mAh inbuilt battery. This supports 3000 fingerprints and 3000 cards

Do you like to link this device with your own web application? Click Here for WEB API Documentation

It is a artificial intelligence face artificial intelligence. It is a Visible Light Facial Recognition Terminal,using intelligent engineering facial recognition algorithms and the latest computer vision technology. It supports both facial and palm verification with large capacity and speedy recognition, as well as improves security performance in all aspects.

SpeedFace V5L adopts touchless recognition technology and new functions namely temperature detection and masked individual identification which eliminates hygiene concerns effectively. It is also equipped with ultimate antispoofing algorithm for facial recognition against almost all types of fake photos and videos attack. Importantly,the 3-in 1 palm recognition is performed in 0.35 sec per hand. The palm data acquired will be compared with a maximum of 3,000 palm templates.

The terminal with temperature and mask detection will be a perfect choice to help reduce the spread of germs and help prevent infections straightly at each access point of any premises and public areas such as hospitals, factories,schools, commercial buildings, stations during the recent global public health issue with its fast and accurate body temperature measurement and masked individual identification funtions during facial and palm verification. This is an upgraded version of ZK's SpeedFace V5L-TD. .

Temperature detection features: Temperature Measurement Distance: 30cm~50cm Temperature Measurement Accuracy: ±0.3 ^oC (±32.54 ^oF) Temperature Measurement Range: 34 ^oC~45 ^oC

Do you like to link this device with your own web application? Click Here for WEB API Documentation

Detects face with Mask. 3000 Face, 3000 Card and optionally 1500 Palm support attendance and access control system. 5" inch touch screen gives smooth of access. Face is recognized from the distance up to 2m long and extra wide angle recognition, which significantly improves the maximum traffic rate. WIFI and 13.56Mhz RFID Card reader can be added optionally.
Features:

1. Touchless User-Identification
2. Smart Visible Light Facial Recognition
3. High-Speed Performance
4. Massive Storage Capacity
5. Wide Pose Angle Acceptance
6. Powerful Anti-Spoofing Algorithm
7. Compatible with Multiple Access Control Accessories
8. Supplement Lighting with Adjustable Brightness
9. Multi-Verification: Face / Palm / Card / Password

Do you like to link this device with your own web application? Click Here for WEB API Documentation

3000 face templates, 4000 fingerprints and 10000 cards supported RSP10f1 is designed handle more number of face templates. rsp10f1 is a 4.3-Inch Touch display multi-biometric time attendance and access control terminal equipped with a high-performance camera for facial recognition. Its high clarity display gives the better feel while using the system. It is a good looking device.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

RSP10i6 is POE supported biometric device. It is designed with good looking body and high performance scanning. It supports 3000 face, 5000 fingerprints and 10000 cards and the full door access. This is perfect attendance system for corporate offices where access control is expected. It has battery slot as inbuilt.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

It's facial recognition works well under strong sunlight (up to 60,000 Lux). It's 168 IR sensors handles the wet, rough fingers more perfectly than any other scanners.

This is a latest Linux-Based Hybrid-Biometric Access Control Terminal featuring Smart Visible Light Facial Recognition technology for outstanding facial recognition distance even up to 2 m with wide pose angle tolerance.

The device offers access control functions to multiple accessories in various configurations. With a 7-inch wide touchscreen and user-friendly interface, it offers a clear-cut viewing experience. Furthermore, the system is enhanced with an exceptionally massive storage capacity with upto10,000 facial templates

Features:

• Touchless User-Identification
• Smart Visible Light Facial Recognition
• High-Speed Performance
• Massive Storage Capacity
• Wide Pose Angle Acceptance
• Powerful Anti-Spoofing Algorithm
• Compatible with Multiple Accessories
• Supplement Lighting with Adjustable Brightness
• Multi-Verification: Face / Fingerprint / Card / Password
• This device is powered by ZkTeco.




Do you like to link this device with your own web application? Click Here for WEB API Documentation

R108P supports both facial and palm verification with large capacity and rapid recognition speed, boosting the security performance in all aspects running with the intellectualized engineering facial recognition algorithm and the latest computer vision technology.

R108P also helps eliminate hygiene concerns; not only because of the contactless recognition technology it is equipped with, but also because of the new functions namely body temperature detection and masked individual identification. The facial recognition capability has reached a new height in the biometrics technology industry with a maximum of 30,000( Optionally 50,000 on request) facial templates, recognition speed of less than 0.3 sec per face, and ultimate anti-spoofing ability against almost all types of fake photos and videos attack.

As mentioned above, R108P can assist in reducing the risk of infection and germs spreading during the recent global public health issue as well. The enables fast and accurate body temperature measurement and masked individual identification during facial and palm verification at all access points, especially in hospitals, factories, schools, commercial buildings, airports, stations, and other public areas. R108P is powered by the ZKTeco

Temperature detection features: Temperature Measurement Distance: 30cm~50cm Temperature Measurement Accuracy: ±0.3 ^oC (±32.54 ^oF) Temperature Measurement Range: 34 ^oC~45 ^oC (93.2 ^oF~113 ^oF)

Do you like to link this device with your own web application? Click Here for WEB API Documentation

8,000 to 20,000 fingerprints and 10000 cards supported attendance and access control system which has inbuilt battery slot

Do you like to link this device with your own web application? Click Here for WEB API Documentation

1500 face templates, 2000 fingerprints, and 2000 cards supported attendance system and simple access control system.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

i7 is a newly introduced time attendance & access control terminal driven by Computer Vision technology for 3-in-1 contactless fingerprint, face and palm recognition which offers simultaneous scanning of a palm print, palm vein and palm shape for unparalleled user identification. The device also supports other biometric attributes such as fingerprint and face. The device offers a powerful anti-spoofing feature for palm vein and palm print authentication. In addition, the reliability is further enhanced by CAMS advanced multi-biometric algorithm. The novel hand tracking technique offers touch-free palm print and vein recognition eliminating any hygiene concerns as well as the need for displaying palm at a particular angle and position enabling rapid user identification.

Supports as high as 12000 face, 20000 fingerprint and 6000 palm templates. High reliability with multi-mode palm recognition Promotes hygiene with touch-free user authentication Next level of anti-spoofing algorithm Outstanding performance & superfast verification Multi-biometric user identification Effortless palm verification at multiple angles

The R902 is a unique portable fingerprint time attendance terminal with a rubber coating. It is specifically designed for off-site time management, such as construction sites, logistic industries, large farms, and the mining industry. Adopting a rubber coating process, its waterproof and dustproof efficacy reached an IP65 protection grade. There is a handle at the top of the rubber coating, which enables users to carry it easily. Above all, this is shockproof (1m above the ground) due to its unique rubber coating. It works with GPRS.

RFID Proximity card with 125khz, it is a plain card. As an optional service, It can be customized as per the requirement and supplied along with the cardholder and printed nylon tag.

Fast face detection which detects and records attendance while the user walks closer to the device. Anti-spoofing algorithm against most of color and B/W photos, videos attack and 3D mask attack. Supplement lighting with adjustable brightness. Exquisite and compact, easy to install.

It detects the user with face mask with 2MP dual lens camera attached. Works only with WIFI , no LAN support. Its API does not support detecting if the face mask worn during the attendance.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

Detects face with Mask. 6000 Face, 10000 Card and optionally 6000-10000 Fingerprint supported attendance and access control system. 5" inch touch screen gives smooth of access. Face is recognized from the distance up to 2m long and extra wide angle recognition, which significantly improves the maximum traffic rate. WIFI and 13.56Mhz RFID Card reader can be added optionally.
Features:

1. Touchless User-Identification
2. Smart Visible Light Facial Recognition
3. High-Speed Performance
4. Massive Storage Capacity
5. Wide Pose Angle Acceptance
6. Powerful Anti-Spoofing Algorithm
7. Compatible with Multiple Access Control Accessories
8. Supplement Lighting with Adjustable Brightness
9. Multi-Verification: Face / Palm / Card / Password

Do you like to link this device with your own web application? Click Here for WEB API Documentation

400 face templates, 1000 fingerprints and 1000 cards supported attendance and full access control system

Do you like to link this device with your own web application? Click Here for WEB API Documentation

High performing 1500 face templates, 2000 fingerprints and 10000 cards supported attendance and simple access control system

Do you like to link this device with your own web application? Click Here for WEB API Documentation

2000 face templates, 3000 fingerprints and 3000 cards supported attendance and simple access control system

Do you like to link this device with your own web application? Click Here for WEB API Documentation

600 palm, 1200 face templates, 2000 fingerprint, 10000 cards supported attendance and simple access control system

Do you like to link this device with your own web application? Click Here for WEB API Documentation

3000 fingerprints, 10000 cards supported attendance and full access control system

Do you like to link this device with your own web application? Click Here for WEB API Documentation

It is fingerprint attendance and thermal printer attached device. Device would print and give a slip for every attendance which, usually, can be used at canteen.

Do you like to link this device with your own web application? Click Here for WEB API Documentation

It is designed to accommodate huge capacity fingerprint based attendance and access control system. It supports with fingerprints from 20,000 to 80,000. It is an attendance and full access control system it precisely detects dry, wet, and rough fingerprints, and operates well under strong sunlight environment

Do you like to link this device with your own web application? Click Here for WEB API Documentation

IP65 waterproof protected, 3000 fingerprints, 10000 cards supported attendance and full access control system

Do you like to link this device with your own web application? Click Here for WEB API Documentation

This module integrates your biometric device with Razorpay's payroll software. As part of this integration, share the serial number of your biometric device with Razorpay once the service has been purchased.

Under this module, Attendance and Management API Activation and Yearly license are automatically added.

For any Razorpay related queries, contact razorpay.

CAMS Protocol helps to enable the web api to your biometric attendance system, which helps to integrate your biometric devices with your own web application. It is a big problem that we have biometric machines but we are unable to integrate them with our websites directly. The problem is resolved by updating our protocol into your device. Our API is extended to support some of the products from some of the brands such as ZKTeco, ESSL and etc. Please note that, please make sure that your machine is tested with the CAMS Testing Tool and get your device verified before making this purchase.

Please note that, Protocol update is an payable operation between us and the manufacturer. So, once the protocol is updated, the same can not be transferred to any other device.

If you are not able to verify the device, then you can contact our technical whatsapp: +91-98409-81006 to seek the feasibility. There are some protocols which costs between 80 USD to 250 USD. Thats something has to be examined and know after discussing with technical team.

Learn more about supported API at the Web API Documentation

You must buy attendance/management api for availing the API services.

600 palm, 3000 fingerprint, 10000 cards supported attendance and simple access control system

Do you like to link this device with your own web application? Click Here for WEB API Documentation

500 DPI, wider size fingerprint scanner supported at Windows 2000, XP, 2003, Vista, 7, 8, 8.1, 10 (32/64 bit)

Accessible through web pages with plain javascript support, for web based fingerprint login, web based fingerprint attendance system and etc. Templates are 5 layer encryption protected which gives you the best secured scanner. Click here for the SDK Documentation

New Generation RFID Guard Tour system built-in LED floodlight.
Instant vibrator gives easy access for the person to handle it. IP67 Rain/Water-proof. Anti-breaking Super Strong Aluminum Alloy. Capacity Of 60,000 transactions one full charge works for 15 days with 200 readings/day. 390g light weight. Works in -20 to 70 C working temperature